Amada EMK Specifications
The Amada EMK series is a high-performance CNC turret punch press platform developed by Amada for precision sheet metal fabrication. Because the machine uses twin AC servo direct drive technology, the EMK series delivers extremely fast hit rates while maintaining excellent punching accuracy.
In addition, the rigid bridge frame construction improves stability during punching operations. As a result, manufacturers benefit from longer tooling life, faster production speeds, and consistent part quality.
The Amada EMK specifications below provide a technical overview of the punching capacity, sheet size capability, turret configuration, and machine performance for the EMK series.
For more information about the machines in this platform, visit the main guide:
AMADA EMK SPECIFICATIONS TABLE
| Specification | EMK 3610 NT |
|---|---|
| Press Capacity | 33 Tons |
| Axis Travel | X: 98.425″ / Y: 60″ |
| Maximum Sheet Size | X: 196.85″ / Y: 60″ |
| Maximum Sheet Weight | 110 lbs (F1) / 330 lbs (F4) |
| Maximum Sheet Thickness | 0.187″ |
| Feed Clearance | 0.984″ |
| Stroke Length | 1.45″ |
| Punching Accuracy | ±0.004″ |
| High Accuracy Mode | ±0.0027″ |
| Table Positioning Speed | X: 3937 IPM / Y: 3150 IPM |
| Turret Rotation Speed | 30 RPM |
| Hit Rate (1″ Pitch) | X: 500 HPM / Y: 330 HPM |
| Hit Rate (Small Pitch) | X: 780 HPM / Y: 515 HPM |
| Marking Hit Rate | Up to 1800 HPM |
| Power Requirement | AC200V 3-Phase |
| Machine Weight | 54,000 lbs |
This turret design allows operators to install a large variety of punching and forming tools, reducing tool change downtime and increasing production flexibility
AMADA EMK PERFORMANCE FEATURES
Several engineering features allow the Amada EMK turret punch press to achieve high production performance.
Twin AC Servo Direct Drive
Unlike traditional hydraulic punch presses, the EMK uses dual servo motors directly coupled to the eccentric shaft. This technology eliminates complex hydraulic systems while improving punching speed and reducing maintenance requirements.
High Hit Rates
The EMK series can achieve hit rates of up to:
-
500 hits per minute at 1-inch pitch
-
780 hits per minute at small pitch
-
up to 1800 hits per minute for marking operations
Because of these speeds, the EMK platform is well suited for high-volume sheet metal production.
Precision Ram Control
The servo-driven ram allows operators to control:
-
stroke length
-
hover height
-
hold time
-
punching speed
Consequently, tooling wear is reduced and punching noise is minimized.
RELATED AMADA EMK MACHINES
Learn more about machines from the EMK platform:
TECHNICAL RESOURCES
Additional documentation for the Amada EMK series:
FAQ SECTION
What is the punching capacity of the Amada EMK?
The Amada EMK turret punch press delivers approximately 33 tons of punching force, allowing the machine to process a wide range of sheet metal materials including steel, aluminum, and stainless steel.
What sheet size can the Amada EMK process?
Depending on configuration, the Amada EMK can process sheet sizes up to approximately 196.85 inches in length and 60 inches in width.
How many stations are in an Amada EMK turret?
Most Amada EMK turret punch presses use a 58-station turret configuration, allowing multiple punch and die sets to remain installed for complex sheet metal operations.